What tool do locksmiths use to open car doors?

Slim Jim All car locksmiths use a Slim Jim as their primary tool. When a car is not being unlocked, a locksmith inserts a thin grille between the glass and the weatherstripping on the car window to unlock it without the key. A cable trap is a curved tool that every locksmith should have for any job. Another option for your locksmith to get the vehicle option is the J and L tools.

These tools are used on older cars with switched lock and unlock buttons found on the inside panel of the doors. In this case, the J tool can be used to reach out the hand and open the car door by lifting the unlock button. Here are five of the most common ways your locksmith will get you back in your vehicle and open it quickly. Because sometimes, if a trap cable doesn't work, the locksmith inserts the modified hexagonal key into the lock to try to open it as if it were the real key to the lock.

However, the way locksmiths use hexagonal keys when you're locked is very different from the way you would use them on a daily basis. The slim handle, a tool used by all locksmiths who offer automotive services, allows the locksmith to take care of you quickly. Once the broken part of the key has been removed, the locksmith will create a duplicate of the key to unlock the car. However, the bread and butter of any locksmith is to help open those stubborn locks using a myriad of tools and gadgets at your disposal.

Hexagonal wrenches (also known as Allen wrenches) can be purchased at any hardware store in or around Milton, Hamilton, so they aren't necessarily restricted to locksmiths. Locksmithing is considered to be one of the “traditional” trades (such as masonry, carpentry and blacksmithing, for example) that has been practiced for hundreds of years. While the construction and materials used in these tools have improved over time, the basic design and function of locksmith tools have remained relatively the same. This is because many locksmiths take their hexagonal wrenches and sharpen the end of the wrench, so that the hexagonal shape becomes a “U”, with two raised edges and a groove in the center.

If the key has broken in the lock, a locksmith can use a key extractor to remove the broken part of the key.